EN 
ES
AR
PT
SV
DE
TR
FR
JA
RU
VI
China Verskaffer Spesiale Staal Nikkellegering Hoë Kwaliteit ASTM B725 Monel 400 Gelaste pyp vir Farmaseutiese en Bio-Medies
The chemical composition of Monel 400 alloy (UNS N04400, MCu-28-1.5-1.8 or Ni68Cu28Fe) is mainly composed of 30% Cu and 65% Ni plus a small amount of Fe (1%-2%). The structure is a typical single-phase austenite structure. Since nickel and copper are mutually soluble in any ratio, there is generally no intermetallic phase precipitation.
Monel400 observes the structure of this alloy under non-etching conditions under a metallographic microscope. It can be seen that there are very dispersed non-metallic inclusions on the austenite matrix, such as sulfides and silicates. Under certain conditions, carbides can also be observed.
- ondersoek
Model: Monel 400 (UNS N04400) Welded Pipes & Tubes
Handelsmerk: RONSCO
| Technical Data Sheet of Alloy Welded Pipe | |
| Produk Naam | Monel 400 (UNS N04400, W.Nr. 2.4360) Welded Pipes & Tubes |
| Ekwivalente materiale | Monel®400 alloy 400, UNS N04400, W.Nr. 2.4360 and 2.4361, NA13, NiCu30Fe |
| Tipe | Gelast |
| Vorm | Vierkant / Reghoekig / Rond / Spesiaal-vormig |
| Uitvoerende standaard | ASTM B725 (Welded Pipe), ASTM B730 (Welded Tube), ASTM B751 (Welded Tube), ASTM B775 (Welded Pipe), ASME SB725 (Welded Pipe), ASME SB730 (Welded Tube), ASME SB751 (Seamless and Welded Tube), ASME SB775 (Seamless and Welded Pipe) |
| Beskikbare grade | Vlekvrye staal 301 / 302 / 303 / 304 / 304L / 310S / 316L / 316Ti / 316LN / 317L / 904L / 2205 / 2507 / 321 / 32760 / 253SM 254 / 410MA 420 / 430 / 465MA 19 / 31803 / 32750MA 32205 / 50 / 60MA 55 / 60 / 61MA S65 / SXNUMX / FXNUMX / FXNUMX / FXNUMX / FXNUMX / FXNUMX / FXNUMX Nitronic 30 / Nitronic 32 / Nitronic 33 / Nitronic 40 / Nitronic 50 / Nitronic 60 ens. |
| Monel 400 / Monel K-500 | |
| Inconel 600 / Inconel 601 / Inconel 625 / Inconel 617 / Inconel 690 / Inconel 718 / Inconel X-750 / Inconel 713C / Inconel 713LC | |
| Incoloy A-286 / Incoloy 800 / Incoloy 800H / Incoloy 800HT | |
| Incoloy 825 / Incoloy 901 / Incoloy 925 / Incoloy 926 | |
| Nimonic 75 / Nimonic 80A / Nimonic 90 / Nimonic 105 / Nimonic C263 / L-605 | |
| Hastelloy B / Hastelloy B-2 / Hastelloy B-3 / Hastelloy C / Hastelloy C-276 / Hastelloy C-22 | |
| Hastelloy C-4 / Hastelloy C-2000 / Hastelloy G-35 / Hastelloy X / Hastelloy N | |
| PH vlekvrye staal 15-5PH / 17-4PH / 17-7PH | |
| Uit deursnee | Welded Pipe 1.9mm - 5000mm or customized |
| Dikte | Welded Pipe 0.5mm - 80mm or customized |
| Maksimum lengte | Welded Pipe 50000mm or customized |
| Voltooi | 2B, Pekel, Gepoleer, Geborsel, Sandblaas, BA, EP |
| Verpakking | waterdigte polisak, houtboks, einddop, houtkram/pallet |
| Inspeksie | TUV, SGS, BV, ABS, LR ensovoorts |
| Aansoek | Chemiese, farmaseutiese en bio-mediese, petrochemiese en raffinadery, omgewings-, voedselverwerking, lugvaart, chemiese kunsmis, rioolverwydering, ontsouting, afvalverbranding ens. |
| Verwerkingsdiens | Masjinering: Draai / Frees / Skaaf / Boor / Boring / Slyp / Ratsny / CNC-bewerking |
| Vervorming verwerking: Buig / Sny / Rol / Stamp | |
| Gelast | |
| Vervalste | |
| Delivery Tyd | 7-40 dae |
| Handelstermyn | FOB CIF CFR CIP DAP DDP EXW |
| betaling | T/T, L/C, D/A, D/P, Western Union, MoneyGram, Volgens klantvereistes betalings vir vanlyn bestellings. |
| Vervoer | Per lug, per see, per trein, per vragmotor |
| Sample | Vry |
| waarborg | Handelsversekering na-verkope diens |
Detailed introduction of Monel®400 alloy 400 Welded Pipes
Overview of Monel 400 (UNS N04400) Welded Pipes & Tubes:
Monel400 is a deformable nickel-copper nickel-based alloy, which has good seawater corrosion resistance and chemical corrosion resistance, and strong chloride stress corrosion cracking resistance. This alloy is one of the few alloys that can be used in fluoride. It has good resistance to oxide stress cracking corrosion in hydrofluoric acid and fluorine gas medium, such as sea water and salt water environment.
In medium concentration alkaline and salt solutions, Monel 400 also has very good corrosion resistance.
In a colder alkaline environment, the alloy is used in a weak acid environment such as sulfur and hydrogen fluoride.
Acid medium: Monel400 is corrosion resistant in sulfuric acid with a concentration of less than 85%. Monel400 is one of the few important materials that can withstand hydrofluoric acid.
Water corrosion: Under most water corrosion conditions, Monel400 alloy not only has excellent corrosion resistance, but also pitting corrosion and stress corrosion are rarely found, and the corrosion rate is less than 0.025mm/a.
High temperature corrosion: The highest temperature of Monel 400 continuous working in the air is generally around 600 ℃, in high temperature steam, the corrosion rate is less than 0.026mm/a. Ammonia: Due to the high nickel content of Monel 400 alloy, it can withstand corrosion under anhydrous ammonia and ammoniating conditions below 585°C.
Supporting welding materials and welding process: It is recommended to use AWS A5.14 welding wire ERNiCu-7 or AWS A5.11 welding rod EniCrCu-7 for welding of MONEL 400 alloy. The welding material size is Φ2.4, 3.2, 4.0, and the place of origin is: American SMC and Deutsche Nickel, welding process and instructions are welcome to call to obtain.
Executive standards: ASTM B 164 (rods, wires), ASTM B 564 (forgings), ASTM B 127 (plates, strips), ASTM B 165 (seamless pipes).
Chemical Composition of ASTM B730 Monel UNS N08400 Welded Tubes:
| C | Si | Mn | Ni | Cu | Fe |
| ≤ 0.3 | ≤ 0.50 | S1.50 | 63 ~ 67 | 28 ~ 34 | s2.0 |
Physical Properties of Monel 400 Alloy UNS N04400 ERW Pipes:
| Digtheid g / cm2 | magnetiese | Termiese geleidingsvermoë | weerstand | Spesifieke hittekapasiteit | Lineêre uitbreidingskoëffisiënt |
| 8.83 | 24.048-48 24 | 0.51-0.477 | 0.51-0.477 | 0.51-0.67 |
Mechanical Properties of ASME SB725 Monel Alloy 400 Welded Pipes:
| Variety | Status | Tensile StrengthZbMPa | Elongation AV% | HardnessHRB | |
| Warm stok | Hot processing state | ≤ 54 | 551-757 | 60-30 | 75-100 |
| > 54 | 516-689 | 50-30 | 72-90 | ||
| Koue opgerolde plaat | uitgegloei | 517-585 | 55-35 | ≤ 68 | |
| 689-964 | 15-2 | ≥ 98 |
Application of ASTM B775 Monel 400 Nickel Alloy Welded Pipe:
Welding copper-nickel alloy-Monel series materials. Mainly used in marine engineering, salt industry, evaporators, condensers, sulfuric acid and hydrofluoric acid equipment, marine heat exchangers, seawater desalination equipment, salt production equipment, marine and chemical processing equipment, propeller shafts and water pumps, gasoline and water tanks, etc.
Vir meer inligting oor Monel 400 Alloy (UNS N04400) Welded Pype en Tubes, bel asseblief + 86-731-82250427 of stuur 'n e-pos aan [[e-pos beskerm]]
